The troubleshooting of a laptop which do not turn on or boot instantly can be critical and harder than the desktop because of its inability for the removal of hardware.
What To Do If Your Laptop Won’t Turn On?
In this article, we’ll discuss troubleshooting steps which help you in identifying what might keep the laptop from turning on. It is recommended that going through those troubleshooting steps for the better outcomes or functional laptop with an effective bootup process.
Note: During troubleshoot disconnect all the connected peripherals like printers, USB cable or mouse.
Connecting the Power Cable to Laptop
It is obvious that if the laptop is running based on the battery power connecting with the AC adapter which might solve the problem. It ensures the adapter and its cord which is correctly securely plugged through both ends. After the plugging the adapter cord if the laptop starts functioning, your battery is defective or dead in this case.
It is the most common problems among various things which can go wrong anytime. The use of the wrong power supply which delivers the wrong or abrupt voltage to a blown plug and fuse.
Your power supply is failed. Initially, it makes sure that the battery has a significant charge. If this thing is not sure battery do not possess the power indicator, then remove the battery and use the main charger.
Always double check the charger which should the right one used for your laptop. Lots of laptops specifically from the same manufacturer use a similar plug size. If you own more than one charger, it is obvious that you might have plugged in the wrong one.
Wrong or different charger provides different voltage and insufficient current. Several other gadgets have similar like battery powered speaker which is unlikely to use the similar voltage as your laptop which usually needs 16-20V.
Further check fuse within the plug. Always use a screwdriver for the removal of a fuse and install one which is considered a good one. If you have the single spare power cable cord which plugs into the power supply concerning quicker swap which isn’t fused at the faulty instance.
Check the wire as power supply get beaten if you carry them everywhere. There are weak points on both ends which joins the black brick and plugs the connection to the laptop. If you can see further the colored wires within the black router with protection, it might be the time to buy a new charging unit.
Check the Screens
Keep disconnecting the external display including the monitor and projector to make sure they’re not refraining among laptop from booting into windows. If the power of LED lights on and you can hear the hard disk or its fan whirring without any image on the screen, then create darkness in a room and check that there is any faint image appearing on a laptop screen.
In this confusion it is very easy to think about that laptop has some bootup issue whereas it’s the screen having problems.
If a faint image appears on screen might be this is the windows login screen where it is most unlikely that your screen inverter has failed. Such components despair the DC coming from a battery or any secondary power supply for AC needed by the screen. Inverter replacement is not that difficult if you have a handy screwdriver.
If boot up process is fine and there is no image on the screen, then the LCD panel might be at fault. It should be kept in view that it is a clear call for replacement of the laptop screen.
Disconnect Laptop from Docking Station
If the laptop is utilizing the docking station, do disconnect it and try conjoining the power cord which directly connects with a computer. After turning the laptop on.
Reconnect & Remove Battery
Note: Lots of laptops specifically MacBook comes in utilizing the architecture which does not permit their batteries needs to be removed.
The power state of a laptop battery prevents the bootup process properly. Ty to disconnect the power cable and remove the battery of the laptop leave your laptop after disconnecting it for at least a minute after few minutes put the battery back to the laptop and keep connecting the cable after turning the laptop on once again.
Drain Out Excess Charge
The residual and electrical charge can keep the laptop for turning on. This is termed as the electricity clog. After performing the certain steps, you can effectively turn drain out the excess charge and start over again which results in powering up.
- Remove the battery of laptop and disconnect the adapter.
- Keep holding the power button for at least thirty seconds.
- Plug AC adapter without replacing the battery within the laptop.
- Again, turn on the laptop
Note: if this procedure does not work for you repeat the similar steps and hold the power button with one minute or do take longer steps.
Remove USB or Memory Card
If we consider an assumption that everything is ok along the screen and power supply the computer might keep getting stuck before loading the windows. The primary issue is with a USB drive or memory card inserted within the USB port or any card reader.
The typical error message in this case that operating system is not found, and it further leads to unusual panic.
Among most of the time, it means that BIOS is set in trying to boot the removable storage drive before the internal hard drive. There is a possibility that disc is left within the DVD so do check those too.
If the provided steps or guidelines do not work for you, it is likely that the hardware component within the laptop has finally failed. It is recommended to contact the manufacturer on getting it repaired. You can also contact any manufacturer for the repair of faulty hardware.
It is recommended to keep looking for different troubleshooting option while treating this issue. Sometimes it is not a technically sound problem, and we just overlook the stuff and sometimes it is the case of hardware failure.